Kingston

Kingston HyperX Fury HX421C14FB-8 8GB 2133MHz DDR4 Desktop RAM

Be the first to review this product

  • DDR4 2133 (PC4 17000)
  • Timing 14-14-14
  • Cas Latency 14
  • Voltage 1.2V
Rs.8,499

Out of stock

Free Shipping

Tiger Retail ( 4 / 5 ) - Power Seller

Description

Kingston HyperX Fury HX421C14FB-8 8GB 2133MHz DDR4 Desktop RAM

The images only represent actual products. The colours may vary or differ slightly.

Highlights

Highlights

  • DDR4 2133 (PC4 17000)
  • Timing 14-14-14
  • Cas Latency 14
  • Voltage 1.2V

Technical Specifications

General
Brand HyperX
Series FURY
Model HX421C14FB/8
Details
Capacity 8GB
Type 288-Pin DDR4 SDRAM
Speed DDR4 2133 (PC4 17000)
Cas Latency 14
Timing 14-14-14
Voltage 1.2V
ECC No
Buffered/Registered Unbuffered
Color Black
Heat Spreader Yes
FEATURES HyperX HX421C14FB/8 is a 1G x 64-bit (8GB) DDR4-2133 CL14 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on eight 512M x 8-bit FBGA components per module. Each module kit supports Intel Extreme Memory Profiles (Intel XMP) 2.0. Each module has been tested to run at DDR4-2133 at a low latency timing of 14-14-14 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows:
Features Power Supply: VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP - 2.5V Typical
VDDSPD = 2.2V to 3.6V
Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
Low-power auto self refresh (LPASR)
Data bus inversion (DBI) for data bus
On-die VREFDQ generation and calibration
Single-rank
On-board I2 serial presence-detect (SPD) EEPROM
16 internal banks; 4 groups of 4 banks each
Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
Selectable BC4 or BL8 on-the-fly (OTF)
Fly-by topology
Terminated control command and address bus
Height 1.23" (31.25mm), w/o heatsink
Fan Included No

Reviews

No reviews have been found

Login to add review

You might also like...